Müller&Mill Quality Instruments Europe GmbH

                                  Müller & Mill Quality Instruments Europe GmbH

contact Contact us:
Tel: +49 2153 958 15 60
Fax: +49 2153 958 15 62
   en-de English Deutsch
Products » Laboratory balances » Precision platform balances » BW-K/BX-K Series |
Müller&Mill Quality Instruments Europe GmbH

Precision platform balances: BW-K/BX-K Series

The patented UniBloc (OPF) sensor achieves high-performance, compact size, and durability at the same time. Shimadzu introduced this wire-cut block sensor to high-precision platform balances in 1989. Combination of low-profiled body and large pan is for operator comfort during bulk weighing.

Features

WindowsDirect function

The balance communicates directly to a PC with Windows® applications. No additional software is needed to interface with spreadsheet, database, word processing, and laboratory software. WindowsDirect function works Windows® 95, 98, 2000, NT4.0, Me and XP. PC must be IBM PC/AT compatible.

 

Superior durability

The simple structure and overload protection mechanism results in maximum durability.

 

Guaranteed sensitivity

Internal resolution is one digit finer level than display, so even minimum readout is highly reliable and stable.

 

Selectable weighing modes

Best measurement modes depending on the purpose and environment can be selected with ease.

 

Built-in calibration weight (BW-K Series only)

BW-K Series is equipped with built-in calibration weight. Operator is released from weight maintenance. A single lever operation is all that is needed to load the weight for calibration.

 

Analog display modes

  • Full range: bar graph clearly indicates the total weight (including the tare) as a portion of the balance capacity.
  • Fill-in: select a target weight and tolerance. The display clearly indecates when they are reached.
  • Checkweighing: set an upper and lower limit. The display continually indicates whether the sample is within the range "Go", over range "HI" or under range "LO." Choose one of the two bar graph display modes.(No signal output)

 

Specification

BW-K (with built-in calibration weights)

Model Capacity Minimum display Pan size (mm)
BW12KH 12kg 0.1g 345 x 250
BW22KH 22kg 0.1g 345 x 250
BW32KH 32kg 0.1g 345 x 250
BW52KS 52kg 1g 345 x 250

BX-K (Standard)

Model Capacity Minimum display Pan size (mm)
BX12KH 12kg 0.1g 345 x 250
BX22KH 22kg 0.1g 345 x 250
BX32KH 32kg 0.1g 345 x 250
BX52KS 52kg 1g 345 x 250


© Müller&Mill Quality Instruments Europe GmbH
Rosental 51-53 | D-41334 Nettetal | Tel: +49 2153-9581560 | Fax: +49 2153-9581562 | E-mail: info@mmq-europe.de